AMPCON knows that you have a lot of questions about our services and why we usually recommend using a professional for electrical diagnosis, repair, and installations. We have listed some of the more frequently asked questions below.
Can you tell me exactly how much this electrical job will cost me?
In our years of experience, we have found that our customers prefer an accurate price based on their exact electrical issue. Most phone quotes are subject to change once the technician sees the job. We don’t think that is fair to you. By allowing us to diagnose the problem in person, you will know exactly what it will cost to get the job done before we begin work.
What is the difference between a regular breaker and an Arc Fault breaker?
All breakers are designed to prevent the wire in your home or business becoming overloaded. All breakers are designed to automatically turn off if the circuit is carrying too much load or if there is a short circuit present. Arc Fault breakers have the additional ability to sense arcing in a circuit. Arcing is the sparking you might see between 2 damaged conductors, and is a fire hazard as this arcing is extremely hot. An arc welder uses electrical arcing to weld steel. A regular breaker may not sense that because it does not always create the load needed to trip the breaker, but an Arc Fault breaker will sense it and shut the circuit down before it can cause a fire. These devices are designed and required to be tested on a monthly basis to ensure proper and safe operation.
Is aluminum wiring a fire hazard or is my aluminum wiring safe?
Aluminum wiring was used in the late 1960s and into the mid-1970s in many homes across North America. Aluminum wiring itself is not dangerous to have in your house. The issue with aluminum wiring is in faulty terminations either in receptacles and switches, or light fixtures and equipment. Due to expansion and contraction of the conductor itself and the fact that aluminum will oxidize over time, heat can be generated at points where the aluminum wiring is improperly terminated. One of the main issues with aluminum wiring is that while everything may appear fine with your wiring, it could be deteriorating behind devices, creating a dangerous fire hazard. If you have concerns about aluminum wiring in your home or business you should have it inspected by a licensed electrician who has experience working with aluminum wiring.
How much does it cost to change my fuse panel?
AMPCON provides you with a quote to complete the work at no charge. We must look at each panel location to provide this quote as there are many variables that must be taken into account. Things like panel location, electrical system flexibility, feeder cable length, and, most importantly, the decision to repair or completely replace the panel are important pieces of information we must find out before we begin a job. To provide an accurate quote without this information is impossible.
What is Whole Home Surge Protection and is it necessary in my home?
Today’s homes are more advanced and filled with electronics than they have ever been, and we are increasingly dependent on not only the electronics, but the ability to easily charge them. Whole Home Surge Protection provides protection to all the electrical equipment in your home from surges and spikes that can be created outside or even inside your home. It acts just like the high quality power bars we often buy for our entertainment systems or our computer systems, but instead it protects all the devices in your home. This means it protects the electronic components of refrigerators, freezers, washers, dryer dishwashers, coffee makers and anything else that wouldn’t traditionally have protection. We recommend whole home surge protectors be installed in all homes to protect all the electronics.
How can I save energy in my office?
The quickest and easiest way to save energy in any building is by making sure your lighting system is as efficient as possible. There are many options available to make your lighting more efficient, from retrofitting existing fluorescent fixtures, to replacing old fixtures with new energy efficient solutions. This could mean using fluorescent bulbs where high bay metal halide or high pressure sodium fixtures were used previously, or even using LED technology to improve lighting levels as well as reduce energy usage. Mr. Electric can give you the right information and work with you of getting all the incentives available in your area to improve your lighting.
Can I do this work myself?
Many areas allow a home owner to do their own electrical work, provided they take out the proper permits and have the work inspected by the proper authorities. The safety of your family and your home should always be considered before you undertake any electrical work. AMPCON suggests call a professional unless you have the proper training, and we provide free quotes for all electrical work.